Commissioning Presets

A Commissioning Preset stores information about the network connection, NTP and other settings and is used to commission the GoBright Interact.

Using a Commissioning Preset, you can set these settings once and apply them on any number of Interacts, which saves you time. A Commissioning Preset can be applied when adding an Interact using the GoBright Mobile App.

Commission Presets can be managed from both the GoBright Portal and the GoBright Mobile app.

How to create a Commissioning Preset via the GoBright Portal
  1. Log in to the GoBright Portal
  2. Go to Settings > Devices > Commissioning presets
  3. Click Add 
  4. Fill in the details
    1. Name: name of the preset
    2. Profile: select the Interact profile you want to apply to the Interact when using this commissioning profile. Learn more about Interact Profiles.
    3. Connection
      1. Connect to ethernet automatically (currently not supported, use Wi-Fi instead)
      2. Wi-Fi: when enabled the Wi-Fi settings can be set below
    4. NTP
      1. Automatic:
        1. when enabled dhcp will be used to assign the NTP server
        2. when disabled: an NTP server address can be set manually
    5. Setup settings
      1. Mounting: select how the Interact will be mounted (on a desk or on a wall). This has an effect on the 'screen orientation setting (see below)
      2. Desk type: does nothing yet, but is required. Pick one randomly.
      3. Screen orientation: sets the orientation of the screen. The values depend on the selected mounting type (desk or wall).
    6. Occupancy detection
      1. Automatic occupancy detection: when enabled, the Interact will use it's built in sensors to detect occupancy.
How to create a Commissioning Preset via the GoBright Mobile app
  1. Open the GoBright Mobile app
  2. Make sure you are logged in as an admin
  3. Tap the menu button in the top right corner
  4. Tap Admin tools
  5. Tap GoBright Interacts
  6. Tap Manage commissioning presets
  7. Select an existing preset OR click the Add Preset button to create a new one
  8. Fill in the details
    1. Name: name of the preset
    2. Profile: select the Interact profile you want to apply to the Interact when using this commissioning profile. Learn more about Interact Profiles.
    3. Connection
      1. Connect to ethernet automatically (currently not supported, use Wi-Fi instead)
      2. Wi-Fi: when enabled the Wi-Fi settings can be set below
    4. NTP
      1. Automatic:
        1. when enabled dhcp will be used to assign the NTP server
        2. when disabled: an NTP server address can be set manually
    5. Setup settings
      1. Mounting: select how the Interact will be mounted (on a desk or on a wall). This has an effect on the 'screen orientation setting (see below)
      2. Desk type: does nothing yet, but is required. Pick one randomly.
      3. Screen orientation: sets the orientation of the screen. The values depend on the selected mounting type (desk or wall).
    6. Occupancy detection
      1. Automatic occupancy detection: when enabled, the Interact will use it's built in sensors to detect occupancy.
How to use a Commissioning Preset

A Commissioning Preset can be applied when adding an Interact using the GoBright Mobile App. To learn more about this, read this article.

0 out of 0 found this helpful