Configure NFC/QR Stickers

While most desks can be equipped with the Connect, it's also possible to use an NFC/QR sticker that can be placed on top of any surface. The benefit is that these can be treated like a Connect so that desk check-ins can be made on any location. 

To use the NFC/QR sticker the following requirements must have been met:

  • A desk needs to be configured
  • The NFC/QR ID of the sticker must be known or;
  • the GoBright App must be installed on a phone with NFC or QR support (all regular Android phones, Apple iPhone 7 or higher)

For the needed support on different types of phones NTAG213 based NFC stickers are advised to be used, and also large NFC stickers (30-38mm diameter) are advised for optimal scanning. 

Adding an NFC/QR sticker using the GoBright App

The quickest way to add an NFC/QR sticker is by using the GoBright app. The steps are outlined below:

  • Press the Menu button on the home screen in the top-right-corner
  • Select Admin tools from the menu
  • Select 'NFC/QR stickers'
  • Press the 'Add NFC/QR sticker' button in the bottom
  • Choose 'Scan address by NFC/QR'
  • Scan the sticker
  • Select the correct Room or Desk
  • Press 'Save'

The NFC/QR sticker has now been successfully added to GoBright.

Adding an NFC/QR sticker using the GoBright portal

If you're using the GoBright portal to add a new NFC/QR sticker make sure that the ID of the sticker is known. You can obtain this by using any NFC/QR scanner and scan the sticker.

  • Login to the GoBright portal with a manager account
  • Go to Settings > Devices > Sensors
  • Press the 'Add'-button in the top right corner to add a new sensor
  • Select the desk that needs to be linked to the specific sticker
  • In the drop-down menu, select 'NFC/QR sticker'
  • Enter the ID of the NFC/QR Sticker and press Save

The NFC/QR sticker has now been successfully added to GoBright.

2 out of 2 found this helpful