1.Start up the display

1.1 Enable the check box at Agree to Terms and Conditions.

1.2 Select Start and go through the wizard.

1.3 Disable the ProMGR and continue.

1.4 Enable ProDVX Api and continue.

1.5 Disable the Chromium as autostart. 

1.6 Set up the Screen timeout on Never and continue.

1.7 Select Reboot device.

2. Download the GoBright Device app 

2.1 Click and hold the left mouse button, then move up.

2.2 Open Chromium app.

2.3 Select continue in the prompt.

2.4 Browse to https://install.gobright.cloud and select Meet/Work/Visit.

2.5 Select Android 8 or higher.

2.6 Select Download GoBright Device App.

2.7 Select Open.

2.8 Select in the security popup window on settings.

2.9 Switch on the toggle button at Allow from this source.

2.10 Select install.

2.11 When installed select Done. Don't open the app!

3. Install the GoBright Device app 

3.1 Select the center bottom HOME-dot in the navigation bar.

3.2 Click and hold the left mouse button, then move up.

3.3 Select AutoStart.

3.3 Select Start App and than GoBright - Device.

3.4 Select Arrow back icon in the navigation bar.

3.5 Click and hold the left mouse button, then move up. Open Settings. 

3.6 Scroll down to System and select Digital signage options.

3.7 Enable ProDVX API and press on confirm for reboot.

3.8 Click and hold the left mouse button, then move up. Open GoBright App *
*When the device reboots in the previous step, the application starts automatically.

3.9 Select While using the app.

3.10 Select Allow.

3.11 Select Continue.

3.12 Select GoBright-device.

3.13 Switch on the toggle button.

3.14 Allow and select twice Arrow back icon in the navigation bar.

3.15 Select Continue.

3.16 Switch on the toggle button and select Arrow back icon in the navigation bar.

3.17 Check Date and time (change if necessary) and select Confirm (and reboot the device manually by power off and power back on the device).

3.18 After reboot your GoBright Activation Code is presented.

With the activation code you're able to go to the next step and activate the display in the GoBright portal.

NOTES

*) Regarding the internet connection, we strongly advise to use wired (PoE+) connections for highest reliability. 

If you have to use Wi-Fi, please make sure you have disabled the ‘Avoid poor network connections’ and ‘Notify whenever a public network is available’ in the Wi-Fi settings menu within Android. This will increase the reliability, for example when maintenance is done on the Wi-Fi network.

You can find this in the Android settings menu -> Wi-Fi -> Advanced. Read this article about how to close the GoBright Android App to enter Wi-Fi settings of the device: Close the GoBright app on a display

Please note not all Android versions have these options, so these options might not be applicable for your device.