This is an installation guide on how to install the GoBright app on ProDVX 10SLBe displays.
Check if your device is on the list of GoBright certified hardware here
Please follow the steps:
1. Plug the PoE cable into the device and press on START button on the startup screen
2. Select Skip on Google Sign in pop up window
3. Select Don’t copy on the Copy apps & data pop up window
4. Select Skip on Account setup pop-up window
5. Accept Google services
6. Skip Set screen lock
7. Press on Skip anyway the Set screen lock
8. Open the Google Chrome app
9. Press No thanks in the Turn on sync pop up window
10. Select Accept & continue
11. Go to the installation page GoBright Install Page and press on Addons
12. Select ProDVX 10SLBe
13. Select Download anyway
14. Open the downloaded ProDVX API DELA-v1.2c apk
15. On Chrome security settings, press on Select
16. Switch the toggle button Allow from this source and then press twice on the arrow back button at the bottom of the screen
17. Press on Install and then on Open
18. Go back to the installation page GoBright Install Page and press Meet / Work / Visit button
19. Select Android 8 or higher
20. Open Download GoBright Device App
21. Press on Download anyway
22. Open the downloaded apk file
23. Press on Install and then Open
24. On the pop-up window “Allow GoBright – Device to take pictures and record video” press on WHILE USING THE APP
25. After that, press again on Allow
26. Press Continue and open the GoBright-Device app
27. When you open the GoBright app, press to toggle on the Allow Do Not Disturb button and then press on Allow
28. Once this is on, press on the arrow back button at the bottom of the screen
29. Press Continue
30. Switch on the toggle button Allow modifying system settings and press on the arrow back button twice
31. This will lead you back to the app and press Continue
32. Select again the GoBright-Device app, switch on the toggle button Allow display over other apps and press twice on the arrow back button
33. Once this is done, check the settings. If these settings are correct, press on Confirm and reboot
34. The screen will reboot and then it will show the Activation code