Installation of The GoBright App on Amino H200 Box player

The Amino H200 Box player requires the GoBright App to be installed and configured before content can be displayed on the screen. This article explains how to install the GoBright App on an Amino H200 Box, connect the device to your GoBright environment, and complete the initial setup.

 

By following the steps below, you can quickly prepare the device for digital signage and start displaying your GoBright View content.

Check if your device is on the list of GoBright certified hardware here. 

Important note: GoBright app version full-15.26.apk or higher is needed

1. Steps on the player

1.1 Power up the player.

1.2 Choose the language of your choice.

1.3 Set your preferred NTP server.

1.4 Set your time zone.

1.5 You now see the “Welcome to your H200” screen.
 

2. Download the GoBright Device app 

2.1 Browse to https://install.gobright.cloud and select View.

2.2 Select Android 8 or higher.

2.3 Select Download GoBright Device App v15.26 (or higher).

After the download has started, the file will usually be saved in your Downloads folder.

3.Steps in the Amino portal

3.1 Log in into https://orchestrate.amino.tv

3.2 Select Applications and Add application.

3.3 Give the Application a name like “GoBright” and Choose the downloaded .apk file and save.

3.4 Select Configurations and Add Configuration.

3.5 Give the Configuration a name like “GoBright Configuration” and press Add.

3.6 Go to the Applications tab and select “Add Action”.

3.7 Select GoBright and press Save Changes.

3.8 Fill in the Parameters tab, Select the latest Firmware Taget Version, Select GoBright as the Home app and set the preferred other settings and Save Changes.

3.9 Select Devices -> Device List -> Add Device.

3.10 Enter the Serial Number of your Amino Player (sticker on the device) and select the GoBright Configuration and Submit.

3.11 Give the player +/-5 minutes time to install the GoBright application. When GoBright has started allow the needed settings.

3.12 Select Confirm and reboot.

3.13 After reboot your GoBright Activation Code is presented.

With the activation code you're able to go to the next step and activate the display in the GoBright portal.

Enjoy your Amino Player!

0 out of 0 found this helpful