GoBright certifies specific hardware to be used as room displays, wayfinders, mapviewers and sensors.
Certified hardware is manageable from the GoBright platform, which means:
- thoroughly tested
- remote updates
- night mode (display is turned on/off) automatically
- automatic reboots.
The following devices are certified:
Certified integrated touch displays
The following displays are certified integrated touch displays (player and touch display):
|Brand||Model||Operating system||Room display||Wayfinder||Mapviewer||Digital reception kiosk||End-of-support 4|
|Philips||10BDL3051T||Android 4.4.4||yes||yes||no||yes 3||-|
|Android 4.4.4||yes||yes||no||yes 1, 3||31-12-2020|
|ProDVX||APPC EL series||Android 6.0||yes||yes||yes||yes 1||-|
|ProDVX||APPC SLB series||Android 5.1, 6.0||yes||yes||yes||yes 2||-|
|ProDVX||APPC DSK series||Android 5.1, 6.0||yes||yes||yes||yes 2||-|
|ProDVX||APPC DSQ series||Android 4.4.4, 5.1||yes||yes||no||yes 2||-|
1) No camera available, taking pictures & scanning badges will not be available on these models
2) Camera is optional, please note you need a camera for taking pictures & scanning badges
3) Badge printing to Brother printers not possible for these models, because this requires Android 5.1 or higher
4) End-of-support means the moment GoBright will not actively test or maintain the software after the defined date.
Certified standalone players
The following players are certified players (external display needed):
|Brand||Model||Operating system||Room display||Wayfinder||Mapviewer|
|ProDVX||ABPC 543||Android 4.4.4, 5.1||yes||yes||yes|
Certified printers (badge printing)
For printing badges from the visitor registration kiosk, there are two options:
It is possible to print directly from the tablet to specific supported printers with the supported supplies.
The following printer/supply combinations are supported:
|Brand||Model||Supported connectivity||Supported supplies||Minimal required
|Brother||QL-820NWB||Netwerk (wired/wifi), Bluetooth||Brother DK-N55224, DK-22251, DK-44205||Android 5.1|
GoBright Badge Printing Service
Using the intermediate GoBright Badge Printing Service you can print to an installed Windows printer.
The GoBright Badge Printing Service should be installed on a Windows Server, and the printer should be locally installed on that server (but can be a network printer).
The following printer models have been tested for printing badges:
Certified sensoring hardware
The following hardware is certified for use as sensoring hardware.
|Occupancy sensor (WDCOCC)||Desk occupancy measurement & no-show detection||Wireless (RF)|
|PIR Room sensor (WDCRD)||Room no-show detection||Wireless (RF)|
Receiving data (RF)
For receiving the data of the wireless sensors a receiver plus antenna is needed.
|ProDVX||ABPC 543||Android 5.1||Processing unit||Wired ethernet or WiFi network connection|
|MINI RF Receiver||-||Receiving RF signal||USB to the processing unit|