This is an installation guide on how to install GoBright on the Neat Frame from factory settings.
Check if your device is on the list of GoBright certified hardware here
- Browse on your PC to https://pulse.neat.no and sign in (If you don’t have a Neat Pulse plan, sign up here: https://neat.no/pulse/#plans)
- Go to Profiles and Press “+” Add profile
- Give the profile a name and use these following settings and Save it
- Select Apps on the left and scroll down to “Other (Neat Boards, Neat Frame)” and toggle on the switch by GoBright
- Select Automatically install on all App Hub devices and click Enable
- Turn on the Neat Frame
- Select your language and press Continue
- Connect the Neat Frame with your WiFi connection and press Continue
- Select the Time Zone and toggle the 24-hour time switch and press Continue
- A Neat enrollment code is needed. Go to https://pulse.neat.no on your PC and select Devices on the left and press Add devices
- Fill in a Name of space or device and select an profile and press Continue
- Fill in the enrollment code on your Neat Frame. Do not unplug the Neat Frame and press Continue when the enrollment is finished.
- Select if you want to share device Analytics and improvements with Neat and press Continue
- Confirm the Camera preview by pressing Looks Good button in the right top corner
- Select skip by Framing boundary
- Select Other and press Continue
- Switch the toggle on at GoBright and press Continue
- “You’re all set!” select Launch Neat Apps. The Neat Frame is installing the GoBright app. Do not unplug the Neat Frame
- Check Date and time zone and press Confirm
-
With the activation code you're able to go to the next step and activate the display in the GoBright portal