Adjusting sitting / standing height

You can adjust the sitting and standing heights when using Interact or Connect hardware on your desks. In this article, you can find detailed instructions on how to make these adjustments with the desk hardware or through the GoBright mobile app.

Using the Interact

The GoBright Interact is an interactive hardware device that can be used for Desk Booking, and it also allows for direct interaction with height adjustable desks. This can be achieved by connecting the Interact expansion box to the control box of the height adjustable desks.

To setup the sitting and standing height on your Interact, firstly check in to your desk booking.

Long hold on any of the arrows and the 'Adjust height' window will appear.

Start adjusting the height using the arrows on the right-hand side. On the three buttons select whether you would like to setup the sitting or standing position by selecting the button accordingly.

Press on the middle button 'Save' and select whether you would like to save the measure as standing or sitting height.

Using the Connect

Setting up the sitting and standing position using the Connect is a straightforward way as it gives good indication of the actual height of the desk. The desk needs to be booked by the user who is planning to adjust the standing and/or seating height.

Color Status Action(s)
GoBright-Connect-Red-Blink.gif Connect menu (red)The connect menu enables users to set their preferred seating and standing height. This menu can be accessed by holding the center button while the desk is booked. Users are able to:
  • Set their standing height by pressing the 'stand button'
  • Set their seating height by pressing the 'seated button'

The connect menu is used to set the preferred standing or seating height. These can also be adjusted within the GoBright portal or mobile app, but this option can be used while physically adjusting the height of the desk.

  • Check-in or book the desk.
  • Adjust the desk height to the preferred seating or standing height.
  • Enter the connect menu by holding the center button on the connect.
  • When the seating and standing lights are lit up, press the buttons to set the corresponding height.
  • The Connect menu can be accessed at any time when the desk is booked to amend these settings.

Note: The menu can be accessed while the 'no disturb' mode is active as well. The connect will display two blue lights on each side.

Using the App

To use the app, make sure that it is installed on your mobile phone and follow the steps below:

  • Log in to the app and open the menu
  • Press 'Profile'
  • Select Sitting height
  • Select the correct height and save it
  • Select Standing height
  • Select the correct height and save it
  • Close the profile options to save the configuration

adjusting sitting,standing height in app.gif

1 out of 1 found this helpful