1.Start up the display

1.1 Select your Language

1.2 If you are using an Ethernet connection, click Next. If you are using Wi‑Fi, select your Wi‑Fi network. The WLAN connection will continue automatically.

1.3 Scroll to the bottom of the Privacy Policy page and click Agree.

1.4 Select Next in the Set up AirPlay and HomeKit prompt

1.5 Select Start using the display

1.6 Open the Settings menu

1.7 Select Network and Internet

1.8 Select Remote device settings

1.9 Enable Control remotely

1.10 After enabling go back to the Network and Internet menu

1.11 Select Local network setup

1.12 Select IP control

1.13 Select Pre-Shared Key and fill in the default key: 123456789123456789

1.14 Select the Enter icon on the keyboard

2. Download the GoBright Device app on your pc

2.1 Download the GoBright App from to https://install.gobright.cloud and select Meet/Work/Visit

2.2 Select Android 8 or higher

2.3 Select Download GoBright Device App v15.20 (or higher)

2.4 Place the .apk file in the root of the USB drive

2.5 Insert the USB (with the APK in the root directory) in the Sony display

3. Install the GoBright app 

3.1 Return to the Home menu and open Pro settings

3.2 Select Install APK

3.3 Select the apk file what is placed on the USB drive 

3.4 Click on Install in the next prompt

3.5 After installation click on OPEN

3.6 Grant the GoBright app the necessary permissions. Select While using the app, allow and Continue

3.7 Turn on the Modify system settings

3.8  Check Date and time (change if necessary) and select Confirm and reboot

3.9 After rebooting open the Settings menu

3.10 Select Apps

3.11 Select Special app access

3.12 Select Energy optimisation

3.13 Then scroll down to GoBright-Device and disable the toggle

3.14 Return to the Settings menu and open System

3.15 Select Power and energy

3.16 Select Auto Turn-off 

3.17 Set Turn-off when watching and Turn-off when inactive to Never.

3.18 Disable the toggle Turn-off when no signal

3.19 Return to the Home menu and open Pro settings

3.20 Scroll down to Initial input source and open this menu

3.21 Select Android app

3.22 Select APPS in the top

3.23 Select the GoBright-Device app and confirm with OK

3.24 Select again OK

3.25 Select Apps in the ProSettings menu

3.26 Enable Pro settings 

3.27 and Enable GoBright-Device

3.28 Return to Pro settings main menu and select Start Pro mode and confirm with OK

3.29 Wait till the device is restarted and GoBright will start automatically 

3.30 After reboot your GoBright Activation Code is presented 

With the activation code you're able to go to the next step and activate the display in the GoBright portal

NOTES

*) Regarding the internet connection, we strongly advise to use wired (PoE+) connections for highest reliability. 

If you have to use Wi-Fi, please make sure you have disabled the ‘Avoid poor network connections’ and ‘Notify whenever a public network is available’ in the Wi-Fi settings menu within Android. This will increase the reliability, for example when maintenance is done on the Wi-Fi network.

You can find this in the Android settings menu -> Wi-Fi -> Advanced. Read this article about how to close the GoBright Android App to enter Wi-Fi settings of the device: Close the GoBright app on a display

Please note not all Android versions have these options, so these options might not be applicable for your device.