Use this guide to install the GoBright app on Yealink Roompanel E2 and Roompanel Plus E2.

1. Choose your language 

   

2. Make sure the device is connected (for example POE+) 

   

3. Choose your time zone 

   

4. Turn on Yealink Management Cloud Service 

   

5. Agree with the Yealink end user agreement 

   

6. Open Yealink Management Cloud Service pulldown menu and select Yealink Management Cloud Service 

   

7. Press Save and wait till Connecting popup is gone 

   

8. Press the Back arrow 

   

9. Optionally turn on Auto Update function and check if the Device Manage options are set like this: 

   

10. Choose GoBright as your UC Provider 

    

11. Press Start 

    

12. Check your system settings, press confirm and reboot 

    

13. After the reboot you can activate your device in the GoBright Portal by using the Activation Code: https://support.gobright.com/hc/en-us/articles/360005322893-Activating-a-device-with-the-GoBright-app 

    

14. Update the GoBright application version by clicking on the update button in the portal.
    

Open the device settings in a browser: https://IP_OF_DEVICE

User: admin

Password: 0000

After logging in, change your password and then log in again using the new password.

1. Go to System
2. Device Manage
3. Enter this code in the Server URL field: M7:nfc.enable=1
4. Press Auto Provision Now
5. Press Confirm