Installation of the GoBright App on Philips 10BDL5051T/00 – 10” room panel

Last updated

How to install the GoBright Android App on:  

  • Philips 10BDL5051T/00 – 10” roompanel 

  • Philips 10BDL3351T/00* - 10” Roompanel 

 

  1. 1. Choose your preferred language and press Start 

  1. 2. Select the correct time zone and press Next 

  1. 3. Clone Media Files into Internal -> Skip 

  1. 4. Signage Display Settings -> Skip 

  1. 5. Security Settings: Checkmark ON for: SICP Network Port, External Storage (for future Philips FW updates) and Unknown Sources Installation and press Next 

  1. 6. Network Setting - Preferred Ethernet (POE+) and press Next 

  1. 7. Turn Ethernet on using the switch-button 

  1. 8. Press Finish in the next screen 

  1. 9. Wave -> Skip 

  1. 10. Screen goes black 

  1. 11. On the right-side of the screen simultaneously short-press the “▪” and “-“ button 

A close up of a device Description automatically generated 

 

  1. 12. Choose Apps and start Chromium (choose “no-thanks” in the browser) 

  1. 13. Go to the page https://install.gobright.cloud 

  1. 14. Choose Meet/Work/Visit 

  1. 15. Choose Android 8 or higher 

  1. 16. Choose Download GoBright Device App and select Download anyway 

  1. 17. Press on the three dots menu button on the right top of the browser and choose downloads 

  1. 18. Press on full-xx.xx.apk and choose Install 

  1. 19. Do not open the GoBright App yet – press “done” 

  1. 20. Close the browser - press the back arrow at the bottom of the screen until you see all the Apps 

  1. 21. Choose Settings – Signage Display – Source settings – Custom app – Select app 

  1. 22. Choose GoBright – Device and save 

  1. 23. Go back to the Signage Display settings and select General settings – Boot on source – Input and select Custom app 

  1. 24. Press 3 x the back arrow at the bottom of the screen and open the GoBright App 

  1. 25. Choose “While using the App” 

  1. 26. Choose “Allow” 

  1. 27. Press continue and select “GoBright – Device” and swith “Allow Do Not Disturb” to ON – press allow 

  1. 28. Press 2 x arrow back 

  1. 29. Press continue and turn ON the switch “Allow modifying system settings” 

  1. 30. Press 1 x arrow back 

  1. 31. Press Confirm and reboot 

  1. 32. Press “Reboot now” - after the reboot the GoBright app boots automatically and the activation code is shown to activate your device in the GoBright Portal 

 

Note: When used as a Visit display: 

  1. 1. On the right-side of the screen simultaneously short-press the “▪” and “-“ button 

  1. 2. Go to Settings – Display – and turn on Auto-rotate screen 

  1. 3. Press back arrow – choose apps and start the GoBright app 

 

* Philips 10BDL3351T/00 has no LED, no Camera, no Speakers 

 

0 out of 0 found this helpful

Articles in this section

Related articles