Use this guide to install the GoBright app on Yealink Roompanel E2 and Roompanel Plus E2.

1. Installation instructions

1.1. Choose your language:

1.2 Make sure the device is connected to WiFi or Wired Network (for example PoE+):

1.3 Select your time zone:

1.4 Turn on Yealink Management Cloud Service  

1.5 Scroll down and Agree with the Yealink end user agreement 

1.6 Open Yealink Management Cloud Service pulldown menu and select Yealink Management Cloud Service 

1.7 Press Save and wait till Connecting popup is gone

1.8 Check if the Device Manage Platform is changed to Yealink Management Cloud Service (Optional turn on Auto Update)

1.9 Select the right Arrow

1.10 Select GoBright as your UC Provider and select the right arrow

1.11 Reset the Password and select the right arrow

1.12 Select Start

1.13 Check your system settings, press Confirm and reboot 

1.14 After the reboot you can activate your device in the GoBright Portal by using the Activation Code: https://support.gobright.com/hc/en-us/articles/360005322893-Activating-a-device-with-the-GoBright-app 

1.15 Update the GoBright application version by clicking on the update button in the portal.

2. NFC scanning

If you want to use NFC on the Roompanel E2 or Roompanel plus E2, follow the steps below:

User: admin
Password: see step 1.11

2.1 Go to System

2.2 Select Device Management

2.3 Enter this code in the Server URL field: M7:nfc.enable=1

2.4 Select Auto Provision Now (Select OK in the next prompt)

2.5 Press Confirm