Certified/supported hardware overview

GoBright certifies specific hardware to be used as Room Displays, Wayfinders, Mapviewers, Sensors and GoBright View Players.

Certified hardware is manageable from the GoBright platform, which means:

  • Thoroughly tested
  • Remote updates
  • Night mode (display is turned on/off) automatically
  • Automatic reboots
Certified integrated touch displays (Meet-Work-Visit)

The following displays are certified integrated touch displays (player and touch display):

Brand Model OS Room display Way
finder
Map
Viewer
Visit
(portrait only)
EOL4
Philips 10BDL4551T Android 8.1 yes yes yes yes -
Philips 10BDL4151T Android 7.1.2 yes yes yes yes -
Philips 10BDL3051T Android 4.4.4 yes yes no yes 3 31/12/2022
Philips 24BDL4151T Android 7.1.2 yes yes yes yes -
ProDVX APPC R23 series

Android 12

Android 11

yes yes yes yes 2,8  
ProDVX APPC 10 SLBe Android 11 yes yes yes yes8  
ProDVX APPC X series Android
8.1, 9.0
yes yes yes yes -
ProDVX APPC SLB / SLBN 6.0, 8.1, 9.0 yes yes yes yes 2 -
ProDVX APPC EL series Android 6.0, 8.1 yes 5 yes yes 5 yes 1  
ProDVX APPC DSK series Android 5.1, 6.0, 8.1 yes yes yes yes 2 -
ProDVX APPC DSQ series Android 4.4.4, 5.1 yes yes no yes 2 31/12/2022
IAdea WRP-1000 A9

Android 9.0 with addon firmware 7

yes yes yes yes  
IAdea XDS 1078 A9

Android 9.0 with addon firmware 7

yes 9 yes yes yes  
IAdea XDS 1078 A7

Android 7.1 with addon firmware 7

yes  yes yes yes 2, 6  
IAdea XDS 1078 A12 / WRP-1000 V2 

Android 12 with addon firmware 7

yes  yes yes yes 1,8  
IAdea XDS 1088 / 1588 series

Android 7.1 with addon firmware 7

yes yes yes yes 2  
LG 10SM3TB
(end-of-life)

Android 4.4.4

yes yes no yes 1, 3 31/12/2020
Yealink Roompanel

Android 10

yes yes yes yes 1,8  
Yealink Roompanel Plus

Android 11

yes yes yes yes 1,8  

1) No camera available, taking pictures & scanning badges will not be available on these models.
2) The camera is optional, please note you need a camera for taking pictures & scanning badges.
3) Badge printing to Brother printers not possible for these models, because this requires Android 5.1 or higher.
4) EOL (End-of-life/End-of-support) means the moment GoBright will not actively test or maintain the software for these models after the defined date.
5) Kiosk mode is currently not supported on the ProDVX EL Series. Please enable kiosk mode manually within the Android settings of the device.

6) QR-Code scanning is not possible on these devices.
7) IAdea devices must have the IAdea GoBright addon firmware installed to become a certified device, available from IAdea. Without this firmware it is not a certified device, and the device will then not work correctly. Please review this article for installing the IAdea GoBright addon.

8) With the latest device app 13.86, Visit printing over LAN is supported for the Android 11 and 12 devices: ProDVX R23 series and the ProDVX 10SLBe, Iadea XDS 1078 A12, Iadea WRP1000 V2 A12, and both Yealink roompanels.

9) IAdea XDS-1078-A9: due to hardware limitations of this Iadea model this display don't support the Orange color for LED light, so the no-show color Orange looks lighter green on this display via the LED's
Certified standalone players (Meet-Work-Visit)

The following players are certified players (external display needed):

Brand Model Operating system Room display Wayfinder Mapviewer EOL 1
ProDVX ABPC 4200
ABPC 4220
Android 9.0 yes yes yes  
ProDVX ABPC 543 Android 4.4.4, 5.1 yes yes yes 31/12/2022
IAdea

MBR-1100

Android 7.1with addon firmware 2 yes yes yes  
IAdea XMP-8550
XMP-8552
Android 12 with addon firmware 2 yes yes yes  


1) EOL (End-of-life/End-of-support) means the moment GoBright will not actively test or maintain the software for these models after the defined date.

2) IAdea devices must have the IAdea GoBright addon firmware installed to become a certified device, available from IAdea. Without this firmware it is not a certified device, and the device will then not work correctly. Please review this article for installing the IAdea GoBright addon.

Certified RF sensoring hardware (Meet-Work-Visit)

The following hardware is certified for use as RF sensoring hardware.

Sensors

Model Purpose Data transmission
Occupancy sensor (RFDOS1) Desk occupancy measurement & no-show detection Wireless (RF)
PIR Room sensor (RFROS1) Room no-show detection Wireless (RF)

Receiving data (RF)

For receiving the data of the wireless sensors a receiver plus antenna is needed.

Advised set:

Brand Model Operating system Purpose Connectivity
GoBright

MGW101-DP06
or
MGW101-DP08 (PoE)

Linux Gateway Wired Ethernet connection
  MINI RF Receiver - Receiving RF signal USB to the processing unit

Alternative set:

Brand Model Operating system Purpose Connectivity
ProDVX ABPC 543 Android 5.1 Processing unit Wired Ethernet or WiFi network connection
  MINI RF Receiver - Receiving RF signal USB to the processing unit
Certified GoBright View hardware (View)

The following hardware is certified in combination with GoBright View. The Windows players have a certified image preinstalled which includes GoBright View.

GoBright View for Android requires Android 8 or higher

Certified Players

Brand Model Operating system Purpose Connectivity

Advantech Industrial
Player + GoBright Certified Windows Image

DS-081
DS-082
Preinstalled
GoBright Certified Windows 10 Image
Digital Signage Wired Ethernet or WiFi network connection
LG WP400
WP401
WP402
webOS 4.0 Digital Signage Wired Ethernet or WiFi network connection
IAdea XMP-8550 
XMP-8552 
Android 12 with addon firmware 3 Digital Signage Wired Ethernet or WiFi network connection
ProDVX ABPC-4220  Android 9 Digital Signage Wired Ethernet or WiFi network connection

1 GoBright View requires Android 8 or higher. While an Android version lower than 8 is available for this device, this device needs to be updatet to at least Android 8.
2 ProDVX APPC SLBe (enterprise) is in development together with ProDVX to become supported.
3 IAdea devices must have the IAdea GoBright addon firmware installed to become a certified device, available from IAdea. Without this firmware it is not a certified device, and the device will then not work correctly.

Certified Displays with Integrated Player

LG Displays from the LG WebOS Signage 4.0 , 4.1 and 6.0 ranges are mainly supported.
Below you find a list of most supported models. If your model is not on the list, please contact support@gobright.com to prevent issues when installing. We try to have an updated list but it might happen that LG already released a new line while it is not listed here. 

Brand Model Operating system Purpose Connectivity
LG

SM5KE
SH7E
UH5E
UH5F
UM3E
UH5PE

webOS 4.0 Digital Signage Wired Ethernet or WiFi network connection
LG

SM3G
UM3(D)F
UH5F
UH7F
UL3G

webOS 4.1 Digital Signage Wired Ethernet or WiFi network connection
LG

32SM5J 43/49/55/65/75/86/98
UH5J 43/49/55/65
UH5N,UH7J,UH7N 43/50/55/65/75/86
UL3J 98/110
UM5K 43/49/55/65
UM5N 65
US5P

webOS 6.0 Digital Signage Wired Ethernet or WiFi network connection
Philips D-line 
Android 8.0 Digital Signage Wired Ethernet or WiFi network connection
Philips Q-line 
Android 8.0 Digital Signage Wired Ethernet or WiFi network connection
Philips T-line 
Android 8.0 Digital Signage Wired Ethernet or WiFi network connection

Sony

BZ50L 98,
BZ40L 85/75/65/55,
BZ35L 85/75/65/55,
BZ30L 98/85/75/65/55/50/43,
BZ40J 100,
BZ35J 50/43,
BZ30J 75/65/55/50/43/32

Android 10.0 Digital Signage Wired Ethernet or WiFi network connection
1 GoBright View requires Android 8 or higher. While an Android version lower than 8 is available for this device, this device needs to be updated to at least Android 8.
2 ProDVX APPC SLBe (enterprise) is in development together with ProDVX to become supported.
3 IAdea devices must have the IAdea GoBright addon firmware installed to become a certified device, available from IAdea. Without this firmware it is not a certified device, and the device will then not work correctly.

Certified Integrated Touch Displays

Brand Model Operating system Purpose Connectivity
Philips

10BDL4551T

Android 8.1 Digital Signage Wired Ethernet or WiFi network connection
ProDVX APPC X series4  Android 8.1, 9.0 Digital Signage Wired Ethernet or WiFi network connection
ProDVX

APPC SLB / SLBN1, 2, 4 

Android 8.1, 9.0 Digital Signage Wired Ethernet or WiFi network connection
ProDVX APPC EL series1, 4 
Android 8.1 Digital Signage Wired Ethernet or WiFi network connection
ProDVX APPC DSK series1, 4  
Android 8.1 Digital Signage Wired Ethernet or WiFi network connection
IAdea WRP-1000 Android 9.0 with addon firmware3 Digital Signage Wired Ethernet or WiFi network connection

1 GoBright View requires Android 8 or higher. While an Android version lower than 8 is available for this device, this device needs to be updated to at least Android 8.
2 ProDVX APPC SLBe (enterprise) is in development together with ProDVX to become supported.
3 IAdea devices must have the IAdea GoBright addon firmware installed to become a certified device, available from IAdea. Without this firmware it is not a certified device, and the device will then not work correctly.
4 In the app Settings (GoBright App Settings) a Watchdog function is enabled by default, you have to disable this function per device to prevent an hourly automated reboot on View devices.

Certified LINAK hardware (Work)

The following hardware is certified by LINAK to function with the GoBright Connect:

Model Description Connectivity Power source
LINAK Control box, type CBD6 Control Box that sends height information from and to the Connect, and controls the attached electric legs Connect Cable with LINAK power+interface LINAK DC port on Control Box
LINAK Electric legs, type IC Electrical legs with integrated Control Box that sends height information from and to the Connect Connect Cable with LINAK power+interface From power adapter via LINAK DC splitter
LINAK Frame, type DF2 Full frame with electrical legs with integrated Control Box that sends height information from and to the Connect Connect Cable with LINAK interface+USB power USB power (e.g. USB adapter)
Certified printers (Visit, badge printing)

For printing badges from the visitor registration kiosk, there are two options:

Direct printing

It is possible to print directly from the tablet to specifically supported printers with the supported supplies.

The following printer/supply combinations are supported:

Brand Model Supported connectivity Supported supplies Minimal required
Android version
Brother

QL-820NWBc

QL-820NWB (EOL)

Network (wired/wifi), Bluetooth Brother DK-N55224, DK-22251, DK-44205, DK-11234 Android 5.1

GoBright Badge Printing Service

Using the intermediate GoBright Badge Printing Service you can print to an installed Windows printer.
The GoBright Badge Printing Service should be installed on a Windows Server, and the printer should be locally installed on that server (but can be a network printer).

The following printer models have been tested for printing badges:

Brand Model
Fargo DTC 1250e

 

12 out of 12 found this helpful